Rose scented DIY soap bars

Rose scented DIY soap bars

This post may contain affiliate links. That means that if you click on a link and purchase something I recommend, I will receive a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases. This helps keep my website up and running and is very appreciated. Thank you for your support!

You can read my full disclosure policy here

These rose scented DIY soap bars are really easy to make and are perfect DIY gifts for loved ones or friends this Valentine’s Day.

How to make rose scented soap

What do you need to make rose scented DIY soap bars:

Most of the ingredients used to make these rose scented soap bars can easily be found online. As an Amazon Prime member I tend to take advantage of my free next day delivery on all orders which makes Amazon my store of choice. For those who usually use Amazon I have included text links to my preferred options.

Please note as an Amazon Associate , if you do use these links to purchase items I may receive a small commission at no extra cost to yourself.

400g Melt & pour soap – I use this fabulous Shea butter soap found on Amazon.

Soap colourant – You can use whichever colours you wish but for mine I have used rose coloured liquid soap colourant.

Rose Essential oil – Or your own preferred fragrance if you wish.

Silicone moulds – I have a used a variety of heart shaped moulds for these rose scented DIY soap bars.

Small stick or spatula

Rose scented DIY soap bars

Other useful tools to make peppermint swirl soap bars:

Double boiler or equivalent. I personally use a heat proof plastic jug placed in a saucepan of water. You can also use a microwavable dish and melt the soap in the microwave if you prefer.

Rubbing alcohol to help the the soap stick together and eliminate bubbles.

Sharp knife to cut up the soap block.

How to make rose scented soap bars:

This recipe and instructions below are enough to make around 6 rose scented soap bars depending on the size of the moulds used.

Step 1 – Start off by cutting up the soap into smaller chunks and then split into 2 x 200g batches.

Step 2 – Carefully melt both batches either using the double boiler technique or by heating in a microwave. If using a microwave make sure you only heat in short 30 second bursts and stir between each interval.

Step 3 – Once both batches have melted add in the colourant and fragrance to the first batch and just the fragrance to the other.

Step 4 – You should now have two different colour batches, one white and one pink. You can now fill up the moulds as you wish. Once poured spray with the rubbing alcohol to get rid of any bubbles on the surface of the soaps.

You can either, pour a single colour into each mould or try layering the colours or making a marbling effect.

For a layered effect – Pour the first layer of soap into the moulds and then let cool for around 30 minutes, spray with rubbing alcohol and then slowly pour the next layer.

For a marbling effect – Just pour the two colours simultaneously into the moulds. Then with a small stick mix the colours as desired. Make sure to work fast, as the soap will start to harden quite quickly once poured into the moulds.

Tip: If the soap starts to harden again just pop in the microwave for a few seconds

Step 5 – Once filled, spray with rubbing alcohol and leave to set for a couple of hours. Once hardened, gently ease the soap out the moulds and the soap is ready to use.

How to store homemade soap

Melt and pour soap contains glycerin which acts as a great moisturiser for the skin, however, if not stored correctly it can start to sweat. The best way to store melt and pour soap is to wrap immediately after de-moulding in cling film and store in a cool, dry place until ready to use.

Giving homemade soap as gifts

These homemade rose scented soap bars also make great DIY gifts. Just wrap in a clear plastic bag and tie with some fancy ribbon and add a gift tag. I used these lovely free downloadable gift tags from Skip To My Lou!

Rose scented DIY soap bars

If you prefer to make your own gift tags I recommend using Avery Design & Print. You can design all your own gift tags or labels with their free templates and software. You can then download for free and print on your home printer.

Final thoughts

Hope you have enjoyed this post and that it’s inspired you to make your own rose scented DIY soap bars. If so, let me know in the comments below.

If you love these Rose soap bars, why not try making my citrus and mint loofah soap bars or my peppermint swirl soap bars as well!

If you want to focus on becoming the best, happiest version of yourself and for more inspiration, subscribe to the blog below or follow me on FacebookTwitter and Pinterest.

Thanks for reading,

Louise Xx

How to make rose scented soap

Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.

2 thoughts on “Rose scented DIY soap bars

  • Reply Patricia Ennis January 3, 2021 at 6:44 pm

    Love your blogs Louise x

    • Reply Louise January 3, 2021 at 6:45 pm

      Glad ya enjoying them 😘 Xx

Leave a Reply

Your email address will not be published. Required fields are marked *